Quick Answer: What are the order of threading the upper part of the sewing machine?

How do you do upper threading?

Steps for Upper Threading:

Place the spool/thread on the spool pin with the right hand and a length of the thread is unwound for top threading. Pass the thread through a thread guide and then on to the tension disc. Insert the thread properly into the two concave discs and check for the tension.

What is the order of threading the lower part of the sewing machine?

Bring the thread up to the thread take up lever and raise it as it goes. Pull the thread down to the thread guide. Pull it through the lower thread guide. Thread the needle.

What is upper threading and lower threading?

There are three stages to threading a sewing machine, threading the upper thread, winding the bobbin, and threading the lower thread (bringing up the bobbin thread).

What is upper threading used for?

When sewing with a machine, the thread wound around the bobbin links with the upper needle thread to form the bottom part of a stitch. Typically used in machine embroidery, quilting, and sewing fine fabrics, bobbin thread is lightweight and strong, adding little bulk while still securing stitches.

What are the parts of machine?

These elements consist of three basic types: structural components such as frame members, bearings, axles, splines, fasteners, seals, and lubricants, mechanisms that control movement in various ways such as gear trains, belt or chain drives, linkages, cam and follower systems, including brakes and clutches, and.

IT IS INTERESTING:  Is embroidery like stitching?

Which part of the machine is the thread holder?

Which Part of the Machine Is the Thread Holder? There’s a thread holder on your sewing machine. It’s usually positioned on the top of the machine and holds the thread spool in place either vertically or horizontally. Once the thread is on the holder, you’re able to wind the thread through the machine correctly.

What is the 10 parts of sewing machine?

What is the 10 parts of sewing machine?

  • Spool Pin. Thread usually comes on a spool.
  • Bobbin Binder Spindle. A bobbin is a little cylinder that may come with or without flanges.
  • Bobbin Winder Stopper. …
  • Stitch Width Dial.
  • Pattern Selector Dial.
  • Hand Wheel.
  • Stitch Length Dial.
  • Reverse Stitch Lever.