What are the lines on my needle plate?
The horizontal line that runs across the needle plate indicates where the needle will drop. When you start sewing, simply place the edge of the fabric along this line for a neat start. 5/8” Seam: 5/8” is most often the standard seam allowance for commercial patterns.
What are the lines on the sewing machine called?
A small opening in the plate allows the bobbin thread to come out and the needle to pass through to make stitches. Most throat plates have small lines notched to the right of the presser foot; these serve as guides for seam allowances and for sewing straight lines. The plate can be removed to clean underneath.
Where is the 1/4 seam allowance on a sewing machine?
Accurate 1/4″ Seam Allowances are achieved with the Quarter Inch Foot because the distance from center needle opening to the right hand edge of the needle, is a 1/4″. Singer Sewing Machine is set to straight stitch, center the needle position.
What is a thread guide?
noun In a sewing-machine, a device, as a loop or an eye, for guiding the thread when it is necessary to change the direction at any point between the spool and the eye of the needle.
What is the most important rule when stitching a seam?
– anything you wish to sew! Rule #1: When stitching a seam together the face of both fabric pieces should be touching. This is a simple rule that will ensure you don’t have to worry about sewing on the wrong side of the fabric.
What is the foot pedal on a sewing machine used for?
This pedal sits on the floor and is connected to your machine using a cord. Similar to a car gas pedal, you simply press it downwards to begin stitching, and the more you press your foot down, the faster the needle will move. If you take your foot off the pedal, the needle will stop.
What does throat plate mean?
1 : throat sheet. 2 : a flat plate holding the feed dog of a sewing machine.