Why is my sewing machine needle breaking?

Why does my sewing machine needle keep breaking?

There could be several reasons why the needle keeps breaking. Make sure the needle is correctly inserted with the flat side facing the back and pushed up into the machine as far as possible. The needle could have been damaged or bent. … The combination of needle size, thread size and fabric is incorrect.

What is the most common cause of needle thread breaks?

Thread Wraps Itself Around a Thread Guide More Than Once

When a threading error has occurred it can easily lead to a sewing machine needle breaking. The extra resistance can pull the needle out of position which usually leads to the needle hitting the throat plate, hook, or bobbin case.

What is the cause of needle thread breakage?

The upper thread tension could be set too tight. Set the tension to the best thread tension setting or less. Make sure the spool of thread is installed correctly using the correct size spool cap for the size of spool. … Check that the bobbin is wound so that it about 80% full and that the thread is evenly wound.

What is remedies of needle breaks?

Needle Thread Breakage

Cause Remedy
Broken check spring. Replace and adjust.
Sharp edges on throat plate, hook point, needle guard, bobbin case, needle groove or eye. Polish rough edges and replace if necessary. Replace the needle being used with a higher quality needle.
IT IS INTERESTING:  What gauge wire fits through seed beads?

What tension should I use for thin fabric?

Use size 70/10 for really thin cotton like voile, size 80/12 for light to medium weight cotton, and 90/14 for thick cotton like denim.