What is the purpose of top stitching?
Topstitching is a sewing technique where the line of stitching is designed to be seen from the outside of the garment, either decorative or functional. Topstitching is used most often on garment edges such as necklines and hems, where it helps facings to stay in place and gives a crisp edge.
When should you top stitch?
1. When top-stitching on both sides of the seam line, make sure you finish the raw edges of the seam allowance individually by serging or applying a zigzag stitch. 2. After clean finishing the raw edges, pin and machine stitch the seams together at the desired seam allowance.
Is Top stitch thread stronger?
This thread is slightly thicker than normal sewing thread which gives definition to areas such as lapels and garment seams. Use a top stitch needle which has a larger eye to accommodate the slightly thicker thread.
What is the difference between Understitching and top stitching?
Understitching is used to prevent edges from rolling out and showing on the right side of the garment. It keeps the edge flat and is not visible from the right side of the garment. … Topstitching and edgestitching are decorative stitching, which show on the right side of the garment.
Is Coats and Clark good thread?
Coats & Clark Inc.
Suitable for indoor and outdoor use, this thread is smooth, colorfast, and weather resistant. The spool of 125 yards of thread for hand and machine sewing provides consistent tension with low breakage for a durable, secure stitch.
Why does my sewing machine keep breaking the top thread?
The upper thread tension could be set too tight. Set the tension to the best thread tension setting or less. Make sure the spool of thread is installed correctly using the correct size spool cap for the size of spool. … Check that the bobbin is wound so that it about 80% full and that the thread is evenly wound.